hello,
I am driving a 2001 Corolla, and lately I decided that I want to install at the gloves storage light,
the light to light only when the door(of the storage) is open and when the car lights is on.

can someone give me any advice?

maybe someone did it before?

Hello
I also own a 2001 corolla I installed a light in my glove box last week I used a presure switch to turn the light on and off and i used a rectangular shaped license plate light. i placed the presure switch on the left side of the glove box.
first remove the glove box: 3 screwes on the top and 2 on the bottom then then drill a whole on the frame that came out with the glive box: left side 2/3 of the way up you will also need to drill a whole in the steel brace that holds the glove box frame so that the presure switch can pass. insert , bolt in and wire the presure switch you will need to link and wire from the fram of the car to the presure switch since it's not bolted onto stell and run the other wire comming from the presure switch to the light in the glove box next run a wire from the light in the glove box to the the battery and put everything back in place and your done

let me know if your having trouble i'll email you pics

hello,
thanks sousa for your help and for the fotos.
yesterday I have finished to install the light at the glove box, I have installed 4 ultralight leds, its looks wonderful.

Hi guys,

I'm not a car wiz, so i always look for help, found a good site that helps with fuse problems, i thinks it's worth a look -
http://www.fixya.com/support/t719090-car_fuse_problem

I hope it will come in handy some day,
Max.