hello all in the club.i need to know the duration on a stock cam for a 20R,im buying a new one,but upgrade,therefor need to know what im going to use in place of stock.i have a new stock,but need better one.plz help,need to know ASAP,i will purches tomorrow

if you don't have to pass emissions, i would strongly recommed the Erson 268* cam. Its not huge and not small, very streetable, it will wake ANY 20R/22R/22RE up. I've used it before in my trucks with great sucess. It has good vacuum at idle and good lower end torque and wakes up about 2000 thru 5000. In a car this car would be a BIG improvement.<br>Adv dur. 268*, Intake @.050 210* .436" lift, Exhaust @.050 210* .436" lift. lobe center 109* adv 4*, lash .008"/.008" They have really good valve springs too, i've never had one fail on me. Their E915070. 95# at 1.560"(valve closed) and 200# at 1"(valve open). can handle revs waaayyyy past what you'll be doing.<br><br>WIll

For more info and specs try here too www.compcams.com I put one of these in my engine but have not run it yet. It is one notch up from stock, probably similar to the one wil posted about.