Hello again,<br>Looks like I'm in sort-of a jam again... and need some help.<br>I started getting everything ready to go back together (good thing I didn't bolt the engine in yet) and soon discovered that my clutch fork does not extend out long enough for the clutch slave cylinder plunger to engage it properly in the fork's dimple, it's about a half inch short.<br>Apparently, the guy who traded me the W-56 transmission inadvertently gave me an early type clutch fork. This fork measures 8 3/8 inch from <br>one of the forked ends to the opposite end, and I figure the longer fork should be about a full inch or more longer.<br>Anyone have a late model RWD clutch fork hanging around that they could possible measure and then let me know what it came out of?... or maybe even sell it to me?<br>Thanks and Merry Christmas,<br> -Drew

I can try to find one but can't make any promises. Wish this issue came up sooner when I was still assembling mine together. Will post back here if I can but maybe someone else can find out b4 me.