|
Easier to buy the manual and do the checks it lists in Chapter 5, but here goes...
1. Check to see if you have 12V at the ignitor pin 3 and same voltage at Coil pin 1 when the ign sw is held in the on position (cranking the eng.). No? Something wrong in ignition sw wiring. Yes? Step 2.
2. Check for voltage at Pin 5 of ignitor. No? Check coil operation. Yes? Step 3.
3. Check for voltage at Pin 1 and 2 of ignitor. No? ignitor is bad. Yes? ECU problem.
Post back to let us know how it goes.
Rob
|