I would like to have complete instructions on how to remove/replace valve cover gasket for a 1992 Toyota Paseo. I sure would be very thankful for the instructions.

well i have been looking for a chilton or haynes manual for the paseo but haven t been able to find one. same engine is in the 93 (i think) fwd celica so i used those instructions.

I have a chilton's! Will look. Not in Chilton's. I looked at motor. Looks like I may see it right, but here goes. I see spark plugs and wires and vacumm lines. I see 6 10mm nuts and a possible problem with the timing belt cover. I will look and get back.
1) I would remove plug wires numbering them from left to right with
tape tags and a permanent marker numbering.
2) do same for vac hoses showing locations
3) Remove with 10mm socket the 6 nut on top
4) making sure I do NOT have to remove bolts from timing cover I pry cover up all the way around the 3 free sides.
5) Scrape old gasket off
6) Affix new gasket with some blue gasket repair in a tube
7) reverse all the above before scraping

I am still going to look some more. Auto Zone in USA has a site to help with some mechanic work. Cannot remember the name of the location.

Paseo and Tercel is same