Group: Members
Posts: 23
Joined: 16-October 07
Member No.:
7,157
Drives: 1992 HiAce Camper Van 2.8 Auto
Location: Canada
This topic (question) has probably been asked and discussed before but I couldn't find it in the search.
I am trying to remove and replace the oem car radio but all I could find was the 2 screws just above the instrument panel. After undoing the screws the dash was still pretty solidly attached to the front.
Can somebody point out if there is any tricks or hidden fasteners that would do the trick.
Group: Members
Posts: 23
Joined: 16-October 07
Member No.:
7,157
Drives: 1992 HiAce Camper Van 2.8 Auto
Location: Canada
I found the answer at another forum. There are 4 screws that are holding the dash. Two just above the instrument panel, one in the air vent and the last one hidden just above the ignition. To expose that screw, the ignition cover must be loosen and dropped down. Cheers.